Category: Uncategorised

Once a song has been mixed, a mastering engineer will take the final bounce of the track and apply whatever processing they deem necessary to put the final touches on a song. This tends to include EQ, compression and limiting especially.

An easy way to differentiate mixing from mastering is that mixing involves the processing of all the different elements of the song and mastering involves processing the entire track.

Typically, mastering is a less elaborate process than mixing as you rarely want to over-do it. When mastering a song any extreme processing can fundamentally change the track in major ways.

In the video below (Mix with the Masters, 2022), engineer Chris Gehringer masters Lorde’s ‘Solar Power’ (2021).

In this video, we can see that he has done very minimal processing involving a slight boost around 100hz and about 2.5dB of limiting. While it’s important to keep in mind that the song was mixed by a professional mixing engineer which makes the job a lot easier at the mastering stage, it still serves as an example of how delicate the mastering process can be.

While it can seem that mastering is an easy process due to how little can be involved at times, this is misleading as the delicate nature of mastering elicits a need for careful listening and decision making that can be overwhelming for many not accustomed to it.

This is why AI mastering tools such as Izotope Ozone have gained so much popularity recently. These plugins analyse the frequency spectrum, dynamic content and stereo image of a track and make adjustments based on industry standards, with a variety of presets and an ability to go in and change anything you don’t like. Increasingly, this is looking to be a big part of the future of mastering.

One one hand, this has given those without the resources or experience the ability to make more professional sounding music that can compete with an industry that has an immense barrier to entry. In my books, that is always a positive as I firmly believe music should be for everyone and not just those with the resources and finances to create without restrictions.

On the other hand, this poses a threat to the art form of mastering as AI can not make the creative decisions that are unique to an individual song and instead attempt to replicate what is already out there. AI mastering also threatens mastering engineers who are not already well established and financially successful the most as the biggest market for these tools are those who would otherwise be paying lower prices for engineers who are up and coming.

Many mixing engineers take issue with AI mastering for these reasons, as well as some (Wright, 2025) arguing that AI will “never replace the human touch” and that “passion isn’t something that can be faked or emulated”.

References:

Lorde (2021) ‘Solar Power’, Solar Power. Available at: https://open.spotify.com/track/7s2kWabRM60W9I61HpKg8C?si=5c055a963a654420 (Accessed: 31st August 2025).

Mix with the Masters (2022) Mastering ‘Solar Power’ by Lorde with Chris Gehringer. May 12th. Available at: https://www.youtube.com/watch?v=sDi9Bvz2wgE (Accessed: 31st August 2025).

Wright, A. (2025) ‘For the Love of Sound: Why You Should Choose Human Mastering Over AI Tools’, AlexanderWright, 15th January. Available at: https://alexanderwright.com/blog/human-mastering-over-ai.

The term ‘The Loudness Wars’ refers to the idea that over the years, the standard dynamic range of music has decreased in favour of more compressed mixes and masters that allow for a more consistent volume when listening to music on the radio or on a playlist and that engineers are at ‘war’ for who can make the loudest sounding track. One such engineer is ‘Andrew Scheps’, who claimed that “The loudness war is over because I won” (Griffith, 2023) in reference to his controversial engineering on Metallica’s ‘Death Magnetic’ (2003) album.

This phenomenon is made clear by looking at the remastered versions of songs that were released prior to the ‘loudness wars’ taking over. For example, this image (Kuokka77, 2012) of the waveform for the 1991 version of ‘Smells Like Teen Spirit’ (Nirvana, 1991) looks like this:

Meanwhile, the remastered 2011 waveform looks like this.

As we can see, the original master has a lot more dynamic variation, with the peaks of the drums poking out from the rest of the mix, whereas the 2011 remaster has a much more consistent volume, but how does this translate to the sound?

Were the original master to come on in a playlist, it may sound a little quieter and less energetic, however once turned up the drums would have much more impact and the song would have more movement and rhythmic force. In contrast, if the 2011 version came on, it would sound louder and more energetic off the bat, however some of the movement and feel of the song may be lost in the process.

With this information, it seems clear that maintaining the contrast of volume in the instruments without over-compressing the mix and instead simply turning the volume up when necessary is the superior option, however I believe it is a little more complex as just looking at a waveform doesn’t tell the whole story.

For example, engineers have found ways to account for this problem that wouldn’t necessarily show up in a waveform, such as the creative use of sidechain compression that can maintain the punch of drums by ducking the volume of other elements in the mix at the drum’s peaks. I also believe that there is no inherently better way to do things in music, as each method simply creates a different sound that can achieve a different feeling and if the artistic vision of the artist is to have the instrumental feel more like a compressed wall of noise that maintains high energy without any particular element standing out too much, there is nothing inherently wrong with that and that sound can absolutely work and sound great when used effectively.

That being said, I also believe that the problem lies in the fact that artists that would have otherwise preferred to have a mix that is more dynamic that places emphasis in the emotions elicited from the contrast of volume in each element of the mix are now unable to fully realise that vision in an effort to compete with the market and the way music is listened to in the streaming era. I feel that we should create space for both forms of mixing and mastering to exist and express itself purely through the creative vision of the artists and not the expectations of the industry.

I personally like to maintain more of a dynamic range in my own music than is standard currently, however with an understanding of the industry and the loudness wars, if I were to mix and master a pop record for somebody else I would take a different approach that would match the loudness of most modern songs.

References:

Griffith, D. (2023) ‘Andrew Scheps talks mixing, production and the legacy of Metallica’s Death Magnetic: “My line is that the loudness war is over because I won… and that was the record that did it”‘, MusicRadar, Available at: https://www.musicradar.com/news/andrew-scheps-mixing-metallica-adele-chili-peppers (Accessed: 30th August 2025).

Kuokka77 (2012) Nirvana’s Smells Like Teen Spirit – 1991 vs. 2011 (loudness war – gain matched). August 9. Available at: https://www.youtube.com/watch?v=mf8DET7ILR4 (Accessed: 30th August 2025).

Metallica (2008)Death Magnetic [CD]. Warner Bros. Records.

Nirvana (1991) ‘Smells Like Teen Spirit’, Nevermind [CD]. DGC Records.

Audio equalization first came in to play in the 1920’s for radio broadcasting through the form of large chunky units with set frequency bands that could be adjusted to the broadcaster’s liking. At the time, the RCA 8B equalizer was the standard, which ended up being utilised by mixing engineers and music producers in the following couple decades.

In 1955, the Pultec EQP-1A was released, a unit that offered a similar effect, though with an increased amount of flexibility and a unique tone and subtle distortion that came from the amplifier in the system. This piece of equipment is still used today for its warm, musical sound and has been emulated my many plugin companies such as Waves and UAD (The UAD Pultec emulations are some of my most frequently used plugins, in fact).

Over the period of the 50s to the 70’s, it started to become common practice for equalizers to be built in to mixing desks, marking the start of an entirely new workflow that is still dominant in studio settings today. This ushered in the era of Neve and SSL equalizers that are also commonly sought after today for their unique tones and characteristics.

The next big leap in EQ technology was in the 70’s, when parametric EQ’s came in to fashion. These equalizers allowed for the ability to adjust the frequency bands with a precision previously unfathomable, allowing for precise, surgical corrective and creative usage. This is still an extremely common form of equalization for the flexibility it provides.

In the 1980’s, digital equalization became a new form of technology in the studio that was both more accessible to a wider audience as well as more flexible and clean than its predecessors. In the current day, digital EQ is the most common form of equalization due to its accessibility only increasing over time, as well as its capacity to recreate many different styles of EQ.

That being said, the older forms of equalization never died out, as each era and unit have their own unique characteristics that make them sought after to this day, with most mixing engineers either paying incredible amounts for older gear or using VST emulations of them in the DAW.

I feel that having an understanding of the history of EQ and what made each era and unit special has helped me to cater the types of EQ that I use for the type of sound I want for a song. For example, using the Pultec EQ on low end gives me a tone that I love when compared to a less characteristic digital EQ such as Fabfilter’s Pro-Q 3, however, if I were looking to attenuate a specific frequency that was poking out, the Pro-Q 3 would always be my go to due to its capacity for surgical equalization.

Sources:

https://blackroosteraudio.com/en/blogreader/a-brief-history-of-equalization

https://vintageking.com/blog/history-of-eq/?srsltid=AfmBOopvBdI8oTfsZtYw8uI07UMRfkEjMmPZRcMNaFaKYqaKSNRL_SIg

https://www.waves.com/9-eq-types-explained

Stereo sound can be traced back to developments made by EMI engineer ‘Alan Dower Blumlein’ in the 20th century. He patented his stereo sound technology in 1931, which involved the use of two grooves on records to create variations in amplitude of the stereo channels, as supposed to the previous dominant technology which only had one groove pattern that emitted a mono signal.

Stereo sound did not rise to become the dominant mode of audio production and listening until the 60’s due to the technology becoming more accessible to the general public. This process was encouraged by the use of stereo sound becoming standard in films, television and music, as well as the emerging popularity of other technologies such as tape machines and more elaborate mixing consoles and effects encouraging further experimentation with stereo sound.

By the 70’s and 80’s stereo was the standard for all devices, making space for further experimentation with what stereo sound could be. One such attempt was the quadraphonic sound system which involved 4 speakers in the corners of a space, however this did not take off due to its high costs and complex usage. One notable use of this technology was Pink Floyd’s ‘Dark Side of The Moon’, which was mixed in this format and performed live at Pompeii with this setup.

This technology did not go to waste, however, as it went on to influence the creation of the surround sound format as we know it, which is used predominantly in film but can be found in some more expensive home setups.

Currently, the emergence of spatial audio seems to me to be the next step forward in stereo sound and I am excited to see the technology become more accessible and fleshed out. In the future, experimenting more with different ways to mix and listen to music is something I want to explore, whether it be quadraphonic sound systems like Pink Floyd, spatial audio or any other technologies that will emerge.

Sources:

https://www.abbeyroad.com/news/the-history-of-recorded-music-has-its-roots-firmly-planted-at-no-3-abbey-road-2596

https://www.emiarchivetrust.org/alan-blumlein-and-the-invention-of-stereo/

Pictured is a visual representation of the stereo imaging for ‘Africa’ by D’angelo (including only the main instruments, not sounds that are only present for short moments of the track)

One interesting element of this song is that the vocals are further back in the mix than the drums and percussion, which is untypical for most commercial mixes. This is the case with many D’angelo tracks, as the rhythm tends to be in the driver’s seat with his music while the vocals serve more as an instrument than the centre of the track.

While it’s important to rely more on your ears than eyes while mixing, visual representations such as these can help in conceptualising depth and space in mixes. Considering where each instrument is coming from in the stereo field and how it interacts with the space around it is a core element of mixing, whether you are attempting to simulate the realism of a tight room or create ethereal soundscapes.

While creating a visual representation of every song you’re mixing and every reference track you use in the process may be unrealistic, taking the concept behind it in to your thought process when mixing can help to create more immersive listening experiences. For example, picturing the instruments as actually being played in a room and what that room looks, feels and sounds like, as well as who and where you are in that room, can help to create a sense of depth that is often forgotten; I believe that mixing in the box can make engineers lose sight of this as the process of staring at a flat, rigid DAW for hours can prevent you from hearing the instruments as part of the room, as supposed to the workflow of using analog gear that has you engaging with the space you are in more.

In mixing, a reference track is a song that shares similar qualities to the track being mixed that the engineer can use to assist them in the mixing process.

One reason that reference tracks are used is that having an industry standard point of comparison for a song that is being mixed can help to influence your decision making and allow you to assess where your mix may be falling short.

Another reason is that a reference track allows you to refresh your ears, as often times if you’ve been working on a mix for extended periods of time you can get used to the sound of the demo or work in progress and not notice that your mix may be, for example, much darker or brighter than what you had originally intended.

Additionally, sometimes engineers will use the demo of the song being mixed as a reference track to stop themselves from straying too far from the creative vision of the artist.

I make use of reference tracks when looking to be inspired by people who make bold mixing decisions, which can influence the way I think about the process and the risks I’m willing to take. One such example is Dijon, especially on his album ‘Absolutely’ and single ‘coogie’.

I also use reference tracks when there are songs that have specific elements to them that I love, such as the drum tone and separation of the elements of the mix in ‘Africa’ and the rest of the ‘Voodoo’ album by D’angelo.

I similarly use reference tracks when a song captures a specific emotion that I wish to convey in my own mix, such as the liberated and angelic feeling of ‘Set Your Spirit Free’ by Sault.